Supplies you will need

(2) Sterling Silver .025 inch French Ear Wires (12) Silver Plated 6mm JUMPLOCK Open Jump Rings (22) Sterling Silver 1.5 inch Head Pins (6) Swarovski Crystal 4mm White Round Pearls (8) Swarovski Crystal 6mm Bicone Siam Beads (8) Swarovski Crystal 4mm Bicone Dark Indigo Beads

Tools you will need

Chain nose pliers, round nose pliers, wire cutters

Step 1

Slide a 6mm siam bicone bead onto a headpin.

Step 2

Using the chain nose pliers bend the head pin right above the last bead at a 90 degree angle.

Step 3

Using your round nose pliers- Start making the loop by bending the headpin CLOCKWISE around the nose of your pliers.You might have to reposition your pliers once or twice. Bend the tail of the headpin until it has formed a complete loop. Using your chain nose pliers or fingers-Wrap the wire around the head pin. Continue wrapping the wire down to the bead. Learn how to do so here: https://youtu.be/_DYhpC8f0Us

Step 4

Trim off the excess wire using wire cutters

Step 5

Repeat steps for all beads

Step 6

Open a jumplock ring and slide in a single bead and close jumplock ring

Step 7

Open a second jump ring and slide in a bead, the first jumplock ring, and another bead. Close the jumplock ring.